Gas Detector

Product Details:

PORTABLE SINGLE/MULTI GAS MONITOR ( MODEL ATS-103M )

INTRODUCTION:
Portable and multi-gas detector simultaneously monitors and displays up tofive gases. The compact and field tough ATS-103M features a non-intrusiveintegrated sampling pump designed for performance, reliability and ease-ofuse.It's optional Data Logging and computer interface features can be used forfurther detailed analysis.

SPECIAL FEATURES:
Automatic OperationSelf Diagnostic CheckProven Sensor TechnologyContinuous, Stable AlphanumericDisplayCustomized Visual & Sound AlarmsSuitable for use in hazardous areaClass-1, Div.-1, Groups A, B, C & DZone ‘0’ of Gas Group IIC
Diffusion or Suction SamplingLong Life Rechargeable BatteriesData Logging and Rs 232 Output CapabilityOperation modes: Real time always readyLight weight, handy and simple to useSampling probeCSIR-CIMFR Approved

SPECIFICATION:
Gases detected : CH4/LEL, O2, H2S, COMeasuring range :CH4: (0.00~5.00)%vol (Optional)LEL: (0~100)%LELO2 : (0~30.0)%volH2S: (0~100)ppmCO: (0~1000) ppmResolution ratio : CH4: 0.01, LEL: 1%LEL, O2: 0.1%vol,H2S:1ppm, CO: 1ppmSensor : High quality catalytic sensor for LELElectrochemical sensor for H2S, CO & O2Sensor lifetime : ≥ 2yearsResponse time : CH4: ≤20S ( T90 ), LEL: ≤20S ( T90 ), O2: ≤35s(T90),H2S: ≤45S ( T90 ), CO: ≤45s (T90)Alarms : Audible--buzzer with ≥85dB @1m audibleVisible--flashing red LED, ≥20m visibleVibrationAlarm point : High and low, fully adjustableTemperature : -25 Deg. C to +55 Deg. CContinuous working time : ≥13hoursDisplay : Liquid Crystal Display(LCD)Battery : 3.7V/1500mACharging time : 4-5 hoursDust and water resistance : IP67Size & Weight : 136*70*37mm,250g

Additional Information:

• Production Capacity: 200 per month
• Delivery Time: 2-3 WEEKS
• Packaging Details: NORMAL PACKING

Product Details:

Portable Gas Detector Model: ATS-103M.

On Start Up, The Instrument Automatically Goes Through Complete Self Integrity Check,On Demand. The Press Of Sampling Switch Initiates The Sampling Through SuctionAnalysis And Digitally Displays The Results. “Hold Key” Enables Monitor/Analysis fora ParticularParameter of Interest.

1. Water-proof process from different aspects, IP66 is guaranteed2. The use of silicone rubber ring effectively increased friction between hand and thisdevice, thus device is protected from being fallen from hand3. The plug-in sensors and battery compartment will ensure easier replacement of these parts.4. Sound, light, vibration 3-mode alarms5. Product number, calibration due date, auto zero function are automatically displayed duringthe startup self-test, this enables users operate and maintain this device more convenient

SPECIFICATION :
Gases detected : CH4/LEL, O2, H2S, COMeasuring range :CH4: (0.00~5.00)%vol (Optional)LEL: (0~100)%LELO2 : (0~30.0)%volH2S: (0~100)ppmCO: (0~1000) ppmResolution ratio : CH4: 0.01, LEL: 1%LEL, O2: 0.1%vol,H2S:1ppm, CO: 1ppmSensor : High quality catalytic sensor for LELElectrochemical sensor for H2S, CO & O2Sensor lifetime : ≥ 2yearsResponse time : CH4: ≤20S ( T90 ), LEL: ≤20S ( T90 ), O2: ≤35s(T90),H2S: ≤45S ( T90 ), CO: ≤45s (T90)Alarms : Audible--buzzer with ≥85dB @1m audibleVisible--flashing red LED, ≥20m visibleVibrationAlarm point : High and low, fully adjustableTemperature : -25 Deg. C to +55 Deg. CContinuous working time : ≥13hoursDisplay : Liquid Crystal Display(LCD)Battery : 3.7V/1500mACharging time : 4-5 hoursDust and water resistance : IP67Size & Weight : 136*70*37mm,250g

Additional Information:

• Delivery Time: 2 weeks
• Packaging Details: NORMAL PACKING

Product Details:

Portable and multi-gas detector simultaneously monitors and displays up tofive gases. The compact and field tough ATS-103M features a non-intrusiveintegrated sampling pump designed for performance, reliability and ease-ofuse.It's optional Data Logging and computer interface features can be used forfurther detailed analysis.
SPECIFICATION:
Gases detected : CH4/LEL, O2, H2S, COMeasuring range :CH4: (0.00~5.00)%vol (Optional)LEL: (0~100)%LELO2 : (0~30.0)%volH2S: (0~100)ppmCO: (0~1000) ppmResolution ratio : CH4: 0.01, LEL: 1%LEL, O2: 0.1%vol,H2S:1ppm, CO: 1ppmSensor : High quality catalytic sensor for LELElectrochemical sensor for H2S, CO & O2Sensor lifetime : ≥ 2yearsResponse time : CH4: ≤20S ( T90 ), LEL: ≤20S ( T90 ), O2: ≤35s(T90),H2S: ≤45S ( T90 ), CO: ≤45s (T90)Alarms : Audible--buzzer with ≥85dB @1m audibleVisible--flashing red LED, ≥20m visibleVibrationAlarm point : High and low, fully adjustableTemperature : -25 Deg. C to +55 Deg. CContinuous working time : ≥13hoursDisplay : Liquid Crystal Display(LCD)Battery : 3.7V/1500mACharging time : 4-5 hoursDust and water resistance : IP67Size & Weight : 136*70*37mm,250g
On Start Up, The Instrument Automatically Goes Through Complete Self Integrity Check,On Demand. The Press Of Sampling Switch Initiates The Sampling Through SuctionAnalysis And Digitally Displays The Results. “Hold Key” Enables Monitor/Analysis fora ParticularParameter of Interest

Additional Information:

• Delivery Time: 2 weeks
• Packaging Details: Normal packing

Product Details:

Portable and multi-gas detector simultaneously monitors and displays up tofive gases. The compact and field tough ATS-103M features a non-intrusiveintegrated sampling pump designed for performance, reliability and ease-ofuse.It's optional Data Logging and computer interface features can be used forfurther detailed analysis.

SPECIAL FEATURES:
Automatic OperationSelf Diagnostic CheckProven Sensor TechnologyContinuous, Stable AlphanumericDisplayCustomized Visual & Sound AlarmsSuitable for use in hazardous areaClass-1, Div.-1, Groups A, B, C & DZone ‘0’ of Gas Group IIC
Diffusion or Suction SamplingLong Life Rechargeable BatteriesData Logging and Rs 232 Output CapabilityOperation modes: Real time always readyLight weight, handy and simple to useSampling probeCSIR-CIMFR Approved

OPTIONS:
On Start Up, The Instrument Automatically Goes Through Complete Self Integrity Check,On Demand. The Press Of Sampling Switch Initiates The Sampling Through SuctionAnalysis And Digitally Displays The Results. “Hold Key” Enables Monitor/Analysis fora ParticularParameter of Interest

SPECIFICATION:
Gases detected : CH4/LEL, O2, H2S, COMeasuring range :CH4: (0.00~5.00)%vol (Optional)LEL: (0~100)%LELO2 : (0~30.0)%volH2S: (0~100)ppmCO: (0~1000) ppmResolution ratio : CH4: 0.01, LEL: 1%LEL, O2: 0.1%vol,H2S:1ppm, CO: 1ppmSensor : High quality catalytic sensor for LELElectrochemical sensor for H2S, CO & O2Sensor lifetime : ≥ 2yearsResponse time : CH4: ≤20S ( T90 ), LEL: ≤20S ( T90 ), O2: ≤35s(T90),H2S: ≤45S ( T90 ), CO: ≤45s (T90)Alarms : Audible--buzzer with ≥85dB @1m audibleVisible--flashing red LED, ≥20m visibleVibrationAlarm point : High and low, fully adjustableTemperature : -25 Deg. C to +55 Deg. CContinuous working time : ≥13hoursDisplay : Liquid Crystal Display(LCD)Battery : 3.7V/1500mACharging time : 4-5 hoursDust and water resistance : IP67Size & Weight : 136*70*37mm,250g.

Additional Information:

• Delivery Time: 2 weeks
• Packaging Details: Normal packing