These gas analyzers can operate stand-alone or form part of an automated measurement system (AMS) or continuous emissions monitoring system (CEM).
Product Details:
Minimum Order Quantity | 1 Number |
Features | RS-485/232 USB |
Application | Industrial UseChemical & Electronic |
Automation Grade | Automatic |
Model | ATS208A |
Brand | Applied Techno Systems |
Display Type | LCD |
Display | 320x264 Graphics High Quality LCD |
Response Time | Less than 30 Seconds |
Power | 230 V AC 50Hz |
Specifications:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Product Type | PORTABLE |
Features | graphics display |
Model | 206 |
Application | Stack. Boiler |
Color | white |
Display | 128 x 64 |
Automation Grade | Automatic |
Display Type | Graphics |
Brand | ATS |
Range | 25%.100%V/V |
Product Details:
Minimum Order Quantity | 1 Number |
Color | Light Grey |
Product Type | Portable |
Features | Micro controller based |
Range | PPM,%V/V |
Display Type | Digital |
Application | Industrial |
Automation Grade | Automatic |
Gas Measurement | Flue Gases |
Material | Aluminum |
Model | ATS206A |
Brand | Applied Techno Systems |
Portable Flue Gas Analyzer Model ATS 206A
The Stack Monitoring System is used for measuring the total volumetric discharge of particulate matter and gaseous pollutants from the stacks. The kit is used for sampling the gaseous stream effluents that is essential to be measured and monitored for all industrial establishments. These effluents has to be controlled in compliance with Air Prevention and Control of Pollution Act of 1981.
The kit is used for taking isokinetic samples of effluents that are emitted from various industrial processes including chemical and combustion process.
The kit is designed to work and operate in horizontal as well as vertical position with its sampling probe and can be used in round or rectangular stacks and ducts with flow velocity ranging from 1 to 40 m/sec and temperatures up to 600C or higher
Features
•Easy to handle light-weight control unit is available in 4 boxes
•Digital temperature reading monitor is provided to read the temperature of dry gas meter and stack gas
•The kit features dry gas meter for total flow measurement
•A thimble holder is provided for leak-proof collection of samples.
•Six glass impingers are provided with the kit
•Acrylic rotameters for flow measurements – 100LPM for SPM and 10LPM for Gaseous
•Light weight monoblock vacuum pump
•Inclined Manometer with 0.01 inch WG resolution with spill proof arrangement
•S - type pitot tube of 1.5-meter length individually calibrated as per EPA regulations (I.I.T.Mumbai)
•S.S. Thermocouple of 1.5-meter length
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Model | ATS 208A |
Application | Laboratory Use |
Brand | ATS |
Features
· Microcontroller based embedded intelligent instruments
· Long Life Electrochemical sensor
· Single 320 X 240 Graphics LCD Display
· Proven technology from gas analyser experts
• ppm or % O2 levels
• Hazardous area options
• Choice of cells for different applications
• Remote or integral sensor
• Choice of sample systems
Applications
• Nitrogen generators
• Inert gas systems
• Air separation
• Furnace atmospheres
• Biogas
• Gloveboxes
• Gasification
• Packaging
The ATS -208A oxygen analysers have numerous applications in processes requiring the precise measurement of oxygen level. In ppm or % levels, safe areas or hazardous ones, in various process conditions and in differing backgrounds there is a ATS – 208A configuration right for your needs. Options include a choice of outputs, AC or DC versions, alternative oxygen cells or sample conditioning
Oxygen is measured in a wide variety of processes, to confirm its presence or absence. The most common application however is measuring oxygen as an 'impurity' in other gases, e.g. nitrogen generators. Oxygen is required in aerobic processes and also in situations that require user intervention, e.g. to ensure that it is safe to enter a chamber for maintenance work. Some processes will only run efficiently in the absence of oxygen, e.g. furnace atmospheres; others just require a low level of oxygen for safety reasons, e.g. inert gas blanketing.
Different electrochemical cells are available to suit the application. The standard A cell has a broad range from high ppm to 50% oxygen. The ‘B’ cell is designed for accuracy at low ppm levels; it will also work at % levels (with a shorter lifetime). The ‘C’ cell is designed for use in % levels of oxygen in the presence of mildly acidic gases, e.g. carbon dioxide, while the ‘D’ cell is perfect for low ppm oxygen applications where hydrogen is present. Applied will be pleased to advise on which cell is most suitable for an application.
A choice of configuration is available. The most convenient and economic is a standard analyser with the cell mounted on the rear. Alternatively, there is remote sensor housing complete with flowmeter and valve. Where cable lengths and/or hazardous area conditions are an issue, the transmitter can be located in the sensor housing.
Different sample conditioning systems are available, standard or bespoke, according to the process conditions. Filters, pumps and regulators can all be incorporated to deliver the sample in the correct condition. Bypass flow systems enable longer distances from process to analyser to be achieved. Applied engineers are ready to recommend the right system for you on receipt of the full gas stream specification.
For hazardous area barrier to the electronics unit in the safe area. Alternatively the electronics unit can be supplied in an Explosion proof enclosure.applications the sensor may be mounted remotely in the hazardous area and safely connected via an zener
Additional Information:
Product Details:
Minimum Order Quantity | 1 Number |
Model | ATS206A |
Application | Laboratory Use |
Brand | Applied Techno Systems |
Portable Flue Gas Analyser
We offer comprehensive range of stack gas Analyzer Portable and Continuous for the analysis of stack/flue gases in exhaust, boiler and combustion process.Model ATS- 206A Flue gas Analyzer measure the flue gases after placing its probe into stack or appliance exhaust and see the concentration of Oxygen (O2), Carbon Monoxide (CO) Carbon Dioxide (CO2) NO2, SO2,NO, NOX etc.
Efficient combustion also reduces emission of pollutants such as nitric oxide (NO), nitrogen dioxide (NO2), sulphur dioxide (SO2), and particulate matter. A gas analyzer will also help measure various gas pollutants in the exhaust for environmental reasons.
Features
· Microcontroller based embedded intelligent instruments
· Single 320 X 240 Graphics LCD Display
Proven technology from gas analyser experts
• ppm or % O2 levels
• Hazardous area options
• Choice of cells for different applications
• Choice of sample systems
• Specification :
Principle Electrochemical, Zirconium, Thermal Conductivity and NDIR (Non dispersive Infrared)Range%V/V PPMResolution0.1 Unit or 1 Unit (Application based)Sampling Method Auto Suction or Direct Plug In Gas Sampling Probe Dia 8mm SS 316Display128 X 64 Graphics LCD Alarm Visual and Audible Power Source Built in Lithium Rechargeable battery Accuracy/2%Response Time Data Storage5000 or 10000Computer Interface RS 232, USB, RS485Sensor Life4-5 Years Operating Time6 – 8 hoursTemperature15degree Celsius Humidity< 85%RH Atmosphere Pressure86- 106KpaHousingHigh Impact Plastic Dimension in mm200 (W) X 120 (H) X 185(D)Weight1.5 KG Warranty One Year
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Application | Laboratory Use, Industrial Use |
Model | ATS 206A |
Brand | Applied Techno Systems |
Additional Information:
Product Details:
Minimum Order Quantity | 50 Unit |
Brand | ATS |
Model | 208A |
Additional Information:
3.7/5
Rated by 10 Users