Gas Leak Detectors

Product Details:

Specifications:

• Accuracy : +/-2%
• Sampling :Diffusion
• Rechargable Battery 

Additional Information:

• Delivery Time: 1 Week

Product Details:

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• Singal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• AlarmCircuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting.

Product Details:

Wall Mounted Ethylene Gas Sensor Transmitter Model ATS 109TD with LED disply & with 4-20 mA output.

Specifications :-
1-Range :0-1000 PPM
2-Sensor : Electro Chemicals
3-LED Display
4-Power Supply; 24 V Dc

Additional Information:

• Delivery Time: 1 Week

Product Details:

Fixed Type Nitrogen Dioxide Gas Leak Detector single channel digital control modules are designed to supervise and display the satus of a single intergal or remote sensor Model ATS 109TD assembly. Model ATS 109TD is housed in a NEMA 4 x wall mount enclosure or Ex -proof enclosure. Model ATS 105M Single channel controllers interface with industry standred two or three wire 4-20mA sensor or other standred voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarms levels. The Graphics display can read the concentration. LEDs on the front panel provide indication of all three alarms.

• The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps. to provide direct alarm action, reducing the need for interposing relays . Local Alarm devices can be connected to the configurable on board alarms.The Fail safe supervisory provides a reliable indicaiton that the Monitor is fully operational. The "Fail Safe" design monitors the input power and sttaus of the Power suppy for the e amplifiers.A failure of any one of these functions illuminates a " Fault" Light Emitting Diode.

Specification:

• Minimum Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• Singal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• Alarm Circuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

 

Product Details:

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• Singal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• AlarmCircuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

Product Details:

Our organization has successfully expanded its business in market owing to the offered elevated quality array of Ammonia Gas Leak Detector. Following industry defined guidelines, we manufacture this detector by utilizing contemporary machines, modernize technology and best grade material. In order to ensure quality, the entire array is rigorously tested upon a series of parameters. It is easy to install, designed for wall mounting and completely programmable from the front panel membrane switches. Apart from this, we offer the entire range in a wide array of specifications as per the diverse requirements of our clients.

Features:

• Rugged construction
• Low maintenance cost
• Non corrosive body

Other Details:

• Model ATS-107M is Multi channel Ammonia gas Monitor for environmental Monitoring and Leak detection.
• The ATS-107M is an economical, yet versatile Multi channel controller with the features needed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device.
• The instrument provides 24 VDC power, audio/visual alarms, alarm relays and other features.
• The ATS-107M is easy to install, designed for wall mounting and completely programmable from the front panel membrane switches.
• Accept Multi 4-20 mA Input from Remote Sensor/Transmitter.

 

Specifications:

• Principle: Electrochemical, Solid State Semiconductor Catalytic and PID.
• Range: PPM/PPB or mg/M3.
• Resolution: 0.1 Unit or 1 Unit (Application based)
• Sampling Method: Diffusion
• Display: 128 X 64 Graphics LCD
• Alarm; Relay Contact NO+NC
• Anolog out Put: 4-20mA
• Digital out Put: RS 232, RS 485 and Modbus Communication Protocol
• Power Source: 230V AC
• Accuracy: +/2%
• Response Time: Data Storage: 1000 or 10000
• Sensor Life: 2-3 Years

Environmental:

• Temperature:-15 degree Celsius Humidity :< 85%RH Atmosphere Pressure: 86- 106Kpa
• Dimension in mm: 210 (W) X 180(H) X 110(D)
• Weight: 1.2 KG

•Warranty: One Year

Product Details:

We are manufacturer of Portable Fixed VOC Gas Detector /Monitor in India
Specifications:

• Principle: Solid State Semiconductor and PID (Photo Ionization)
• Range: PPM, PPB or mg/M3
• Resolution: 0.1 Unit or 1 Unit (Application based)
• Sampling Method: Diffusion, Auto Suction or Direct Plug In
• Display: 128 X 64 Graphics LCD
• Alarm; Two Levels Low High, Visual and Audible
• Power Source: Built in Lithium Rechargeable battery
• Accuracy: +/2%
• Response Time: <5 Second
• Flow Rate: 2.84 L/M
• Data Storage: 1000 or 10000
• Sensor Life: 2-3 Years
• Operating Time: 6 – 8 hours

Environmental:

• Temperature:-15degree Celsius Humidity :< 85%RH Atmosphere Pressure: 86- 106Kpa
• Housing: High Impact Plastic
• Dimension in mm: 115 (W) X 180 (H) X 60(D)
• Weight: 0.6 KG
• Warranty: One Year

Product Details:

ATS-101M Hydrogen Gas Detector is Portable Single Gas Detectors are capable of detecting, monitoring Hydrogen and Combustible gases making them ideal for use in various environments.

Specifications:

• Principle: Electrochemical, Solid State Semiconductor
• Range: %V/V, %LEL, PPM, PPB or mg/M3
• Resolution: 0.1 Unit or 1 Unit (Application based)
• Sampling Method: Diffusion, Auto Suction or Direct Plug In
• Display: 128 X 64 Graphics LCD
• Alarm; Two Levels Low High, Visual and Audible
• Power Source: Built in Lithium Rechargeable battery
• Accuracy: +/2%
• Response Time: <5 Second
• Flow Rate: 2.84 L/M
• Data Storage: 1000 or 10000
• Sensor Life: 2-3 Years
• Operating Time: 6 - 8 hours

Environmental:

• Temperature:-15degree Celsius
• Humidity :< 85%RH 
• Atmosphere Pressure: 86- 106Kpa
• Housing: High Impact Plastic
• Dimension in mm: 115 (W) X 180 (H) X 60(D)
• Weight: 0.6 KG
• Warranty: One Year

Product Details:

Our Multi Channel Gas Leak Detector offer today’s best technology with features that provide enhanced durability, performance and accuracy. With leading microprocessor technology,our multi-channel controllers can be programmed to measure a wide variety of combustible and toxic gases. In addition, features like weatherproof enclosures; large, back-lit LC displays; field-adjustable alarm levels; digital data communication capabilities; and easy-to-use front keypad switches make our multi-channel gas monitor the dependable choice for both hazardous and safe environments.

Product Details:

Portable HF Gas Leak Detector is Portable HF Gas Monitor/Analyser/ Detector are capable of monitoring of HF Concentration for stack and ambient.

Features:

• Microcontroller based embedded intelligent instruments
• 128 x 64 Graphics LCD Display
• Diffusion or Auto Suction Sampling Mode
• Long Life Rechargeable Li-Ione Battery
  Data Logger with RS 232 and USB Computer Interface

Applications:

•  Personal Monitoring
• Chemical Plants
• Water/West water Treatment
• Portable Single Gas Detectors

 

Specifications:

• Principle: Electrochemical
• Range:PPM or mg/m3
• Resolution: 0.1 Unit or 1 Unit (Application based)
• Sampling Method: Diffusion, Auto Suction or Direct Plug In
• Display: 128 X 64 Graphics LCD
• Alarm; Two Levels Low High, Visual and Audible
• Power Source: Built in Lithium Rechargeable battery
• Accuracy: +/1%
• Response Time: <5 Second
• Data Storage: 1000 or 10000
• Sensor Life: 2-3 Years
• Operating Time: 6 – 8 hours

Product Details:

Specifications:

• Accuracy: +/-2%
• Display: 128x64 Graphics Display
• Sampling : Diffusion
• Power Supply: Rechargeable Lithium Battery
• Response Time: 30 Seconds at 95% variation
• Operating Temp: -5 to 55 deg
• Range : 0-10 PPM

Product Details:

Specifications:

• Techincal Specification;
• Display: Graphic Dispaly
• Sensor: EC
• Range: 0-10 PPM
• Power Supply: Rechargeable Lithium Battery
• Response Time: 30 seconds at 95% variation.

Product Details:

Specification:

• Overall Ranges: PPB/PPM/ %V/V%LEL
• Sampling Method: Diffusion (D) Or  Suction (S)
• Principal: Specification to Application
• Sensor Life: 2-5 Years
• Display: Graphics LCD
• Resolution: 0.1 or 1 PPM /% as applicable
• Accuracy: +/-2% 
• Repeatability: +/-1%
• Response Time: < 10 sencond at 95 % variation 
• Alarms: Low & HI Visual  and Audible
• Power supply: Lithium Rechargeable Battary
• Housing : High Impact Plastic
• Temp Range: 0-55 deg c
• warranty- 1 year
• Weight: 300 GM

Product Details:

Formaldehyde Gas Leak Detector is portable Single/Dubel  Gas Detectors are capable of detecting Oxygen , Toxic , and Combustible gases making  them ideal  for  use in  various environments. Compact, Light weight Intelligent unit with Application Specific Sensors Sensitive  to PPB / PPM or % age levels of Gases & Vapors.

Features:

• Complete  Automatic Operation.
• LCD Display
• Continous  Diffusion  / Suction  Sampling
• Confidence  Beep every 15 seconds.
• Complete self  Integrity  check on start 
• Automatic  Calibration
• Display  of WARN  & ALARM
• Low battery  Alarm.

Specification:

• Overall Ranges: PPB /PPM /%V/V% LEL
• Sampling Method: Diffusion  (D) or suction (S)
• Principal: Specific to Application
• Sensor Life: 2-5 Years
• Measurement: Continous
• Readout:128x64 graphics LCD
• Resolution: 01 or 1 PPM / % as applicable
• Accuracy: +/-2% & 0.5% for oxygen 
• Repeatability: +/- 1%
• Response Time: < 10 senconds at 95 % variation
• Alarms: Low  & HI Visual 
• Power supply: 3.7 V DC Lithium  Rechargeable Battery
• Battery Life: 6 to 8 hours
• Temp: 0-55 deg C
• Warranty : One year

Product Details:

ATS-105M Online Oxygen Gas Leak Detector ATS 105M single channel digital control modules are designed to supervise and display the satus of a single intergal or remote sensor assembly. It is housed in a NEMA 4 x wall mount enclosure or Ex -proof enclosure. Model ATS 105M Single channel controllers interface with industry standred two or three wire 4-20mA sensor or other standred voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarms levels. The Graphics display can read the concentration. LEDs on the front panel provide indication of all three alarms.The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps. to provide direct alarm action, reducing the need for interposing relays . Local Alarm devices can be connected to the configurable on board alarms.The Fail safe supervisory provides a reliable indicaiton that the Monitor is fully operational. The "Fail Safe" design monitors the input power and sttaus of the Power suppy for the e amplifiers.A failure of any one of these functions illuminates a " Fault" Light Emitting Diode.

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• Singal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• Alarm Circuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

 

Product Details:

The Sulfar Dioxide Gas Leak Monitor is a single Gas Multipurpose monitor that combines simplicity and high performance in a low cost,low maintenance package.The rugged NEMA 4X or 7x assembly is suitable for a variety of industrial , commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or oxygen in process Flue Gas or Ambient Air.

Special Features:

• Fast and accurate response
• Long Life Application Specific Gas Sensor, 
• Technologies, 
• Solid State Electronics, 
• Continuous Monitoring,
• Two Alarm Levels, 
• Fail Safe Protection, 
• Recorder Output, 
• Integral or Remote Mounting Sensor,
• Un-attended Operation, 
• Sampling by Diffusion or sample Draw Pump.
• Flexibility to fit your application needs,
• Interfaces with Industry Standard Tranmitters.

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• singal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• AlarmCircuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

Product Details:

Nitrogen Dioxide Gas Leak Detector single channel digital control modules are designed to supervise and display the satus of a single intergal or remote sensor Model ATS 109TD assembly. Model ATS 109TD is housed in a NEMA 4 x wall mount enclosure or Ex -proof enclosure. Model ATS 105M Single channel controllers interface with industry standred two or three wire 4-20mA sensor or other standerd voltage / current sensor transmitters and provide the user with concentration display and two independent adjustable alarms levels. The Graphics display can read the concentration. LEDs on the front panel provide indication of all three alarms.The alarm relays can be programmed to be either latching or non-latching and to activate either as a rising or failing alarm. The relays are SPDT Form C type rated at 5 Amps. to provide direct alarm action, reducing the need for interposing relays . Local Alarm devices can be connected to the configurable on board alarms.The Fail safe supervisory provides a reliable indication that the Monitor is fully operational. The "Fail Safe" design monitors the input power and status of the Power suppy for the e amplifiers.A failure of any one of these functions illuminates a " Fault" Light Emitting Diode.

Specification:

• Minimum Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• signal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• Alarm Circuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

Product Details:

Multi Point Leak Detector is Multi channel gas Monitor for environmental Monitoring and Leak detection. The ATS-107M is an economical, yet versatile Multi channel controller with the features needed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. The instrument provides 24 VDC power, audio/visual alarms, alarm relays and other features. The ATS-107M is easy to install, designed for wall mounting and completely programmable from the front panel membrane switches.Accept Multi 4-20 mA Input from Remote Sensor/Transmitter.

Specifications:

• Principle: Electrochemical, Solid State Semiconductor Catalytic and PID
• Range: PPM/PPB or mg/M3
• Resolution: 0.1 Unit or 1 Unit (Application based)
• Sampling Method: Diffusion
• Display: 128 X 64 Graphics LCD
• Alarm; Relay Contact NO+NC
• Analog outPut: 4-20mA
• Digital outPut: RS 232, RS 485 and Modbus Communication Protocol
• Power Source: 230V AC
• Accuracy: +/2%
• Response Time: <5 Second
• Data Storage: 1000 or 10000
• Sensor Life: 2-3 Years

 

Environmental:

• Temperature:-15 degree Celsius
• Humidity :< 85%RH 
• Atmosphere Pressure: 86- 106Kpa
• Dimension in mm: 210 (W) X 180(H) X 110(D)
• Weight: 1.2 KG
• Warranty: One Year

Product Details:

Features:

• Single Channel or Multi Channel
• Applied Techno Systems, 
• Indigenous manufacturer of Gas Monitor, 
• Gas Leak Detector, 
• Analyzers with Application specific sensor Technologies capable of Continuously measuring Monitoring Toxic, 
• Explosive/Combustible/flammable Hydrocarbons in ambient Air.

Specification:

• Range : 0-100% LEL
• Resolution : 1% LEL
• Sensor : Catalytic Combustion
• Power Supply : 230 V AC or 24V DC
• Housing : Flameproof for IIA, IIB IIC

Product Details:

Online Sulfar Dioxide Gas Leak Monitor - Model ATS 105M. The Monitor is a single Gas Multipurpose monitor that combines simplicity and high performance in a low cost,low maintenance package.The rugged NEMA 4X or 7x assembly is suitable for a variety of industrial , commercial and general purpose applications to monitor HAZARDOUS,Toxic gases or oxygen in process Flue Gas or Ambient Air.

Specification:

• Minium Resolution: 0.1 or 1 unit of the range
• Indication: Digital Continuous
• Mounting: wall
• Sensor Technology: Appropriate to Application
• Detection Method: Diffusion / Sample Draw Pump
• Accuracy: +/- 2%
• Linearity: +/- 2%
• Relative Humidity: 0-99 % Non-condensing
• Response Time: ( 90% in 10 seconds)
• singal Output for Recorder: 0- IV,420 mA (Optional)
• Alarm Setting: High and very High Adjustable over full range
• AlarmCircuits: SPDT 5 AMP 220V Contacts
• Controls: Zero , Span, Alarm setting

Additional Information:

• Item Code: 1056
• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Portable Configned Space Gas Monitor  is portable Single/Dubel Gas Detectors are capable of detecting Oxygen, Toxic, and Combustible gases making them ideal for use in various environments. Compact ,Light weight Intelligent Unit with Application Specific Sensors Sensitive to PPB / PPM or % age levels og gases & Vapors.

Features:

• Complete Automatic Operation
• LCD Display
• Continous Diffusion / Suction Sampling
• Confidence Beep every 15 seconds
• Complete self Interity check on start
• Automatic Calibration
• Display of WARN & ALARM
• Low Battery Alarm

Specification:

• Overall ranges: PPB / PPM /% V/V% LEL
• Sampling Method: Diffusion (D) or Suction (S)
• Principle: Specific to APplication
• Sensor Life: 2-5 Years
• Measurement: Continuous
• Display: Graphic LCD
• Accuracy: +/-2% & 0.5% for oxygen
• Response time: < 10 seconds at 95% variation
• Housing : High Impact Plastic (ABS)
• Power supply: Lithium Rechargeable Battery.

Additional Information:

• Production Capacity: 100
• Delivery Time: 5 days
• Packaging Details: normal

Product Details:

With thorough understanding of the relevant industry, we are offering a wide range of Chlorine Gas Detector. It is suitable for Combustible gases (%LEL) or PPM level of CO,H2S, SO2,NO,NO2,CL2,B2H6, Hydrocarbons, organic solvents and other Toxic Gases. This system is manufactured using best quality raw-material and highly developed technology. In tune with different needs of our copious clients, we customize the entire range in different sizes and other related specifications. Our offered range has gained exceptional value amongst our clients for its defined features.

Features:

• Precisely designed
• Sturdiness
• Long operational life

Other Details:

• Model ATS-105M is Single Point Hazardous Gas Monitor/ Alarm for ambient air. Model ATS-105 is suitable for Combustible gases (%LEL) or PPM level of CO, H2S, SO2, NO, NO2, CL2, B2H6, Hydrocarbons, organic solvents and other Toxic Gases.
• The ATS-105M features a rugged, long-life Electrochemical, Catalytic Pellister, metal oxide semiconductor (MOS) sensor.
• The sensor is available either in a separate junction box for remote mounting up to several hundred Meters from the monitor, or as an integral component attached to the instrument.
• The ATS-105M provides a Graphics LCD display of gas concentrations, audio/visual alarms, relay contacts, plus analog (4-20mA ) and digital RS 232/485 and USB outputs. Accept Single 4-20 mA Input from Remote Sensor/Transmitter.

Specification:

• Principle Electrochemical, Solid State Semiconductor Catalytic and PID
• Range PPM/PPB or mg/M3
• Resolution 0.1 Unit or 1 Unit (Application based)
• Sampling Method Diffusion
• Display 128 X 64 Graphics LCD
• Alarm Relay Contact NO+NC
• Analog out Put 4-20mA
• Digital out Put RS 232, RS 485 and Modbus Communication Protocol
• Power Source 230V AC
• Accuracy +/2%
• Response Time
• Data Storage 1000 or 10000
• Sensor Life 2-3 Years
• Environmental
• Temperature 15 degree Celsius
• Humidity < 85%RH
• Atmosphere Pressure 86- 106Kpa
• Dimension in mm 210 (W) X 180(H) X 110(D)
• Weight 1.2 KG
• Warranty One Year

Product Details:

With the involvement of high-end technology, modern machinery and advanced tools in all our processes, we are engaged in offering a qualitative assortment of SF6 Gas Leak Detector. Widely used for gas detection in varied industries, this has have become the first choice of the customers. Our offered detector is exceptionally valued in the market, owing to its efficient functionality and low maintenance. Clients can avail the entire range from us in various technical specifications at affordable prices.

Features:

• Low maintenance 
• Rust resistance 
• High performance

 Specifications:

• Measuring Principle: Ion-Vaccum – Principle
• Power Supply: 3V DC, two "C" cell Alkaline batteries
• Ultimate Sensitivity: 5 g SF6/year
• Operating Temperature: 0° to 52°C
• Battery Life: Approximately 30 hours
• Duty Cycle: Continuous, no limitation
• Response Time: Instantaneously
• Reset Time: One Second
• Warm-Up Time: Approximately 2 seconds
• Unit Weight: 560 grams
• Unit Dimensions: 229 X 65 X 65mm
• Fixed Probe Length: 355mm
• Warranty: One year
• Battery: 6 volt alkaline, Rechargeable batteries 1.5V (AA Alkaline)
• Temperature: -10°C to 50°C
• Humidity: 15 to 95% RH
• Weight: 200 GM
• Dimension: 119(H) X80(L)X 25(D)